Adding A Configuration Object - D-Link NetDefendOS User Manual

Name:
DestinationPorts:
Type:
SourcePorts:
SYNRelay:
PassICMPReturn:
ALG:
MaxSessions:
Comments:
Web Interface
1. Go to: Objects > Services
2. Select the telnet entry in the list
3. In the Comments textbox, a suitable comment
4. Click OK
Verify that the new comment has been updated in the list.
Important: Configuration changes must be activated
Changes to a configuration object will not be applied to a running system until the new
NetDefendOS configuration is activated.
Example 2.14. Adding a Configuration Object
This example shows how to add a new IP4Address object, here creating the IPv4 address
192.168.10.10, to the address book.
Command-Line Interface
gw-world:/> add Address IP4Address myhost Address=192.168.10.10
Show the new object:
gw-world:/> show Address IP4Address myhost
Property
---------------------
Name:
Address:
UserAuthGroups:
NoDefinedCredentials:
Comments:
Web Interface
1. Go to: Objects > Address Book
2. Click on the Add button
telnet
23
TCP
0-65535
No
No
<empty>
1000
Modified Comment
Value
-------------
myhost
192.168.10.10
<empty>
No
<empty>
74
Chapter 2: Management and Maintenance