Adding A Configuration Object - D-Link NetDefend DFL-210 User Manual

2.1.9. Working with Configurations
CLI
gw-world:/> set Service ServiceTCPUDP telnet Comments="Modified Comment"
Show the object again to verify the new property value:
gw-world:/> show Service ServiceTCPUDP telnet
Property
-----------------
DestinationPorts:
SourcePorts:
SYNRelay:
PassICMPReturn:
MaxSessions:
Comments:
Web Interface
1. Go to Objects > Services
2. Click on the telnet hyperlink in the list
3. In the Comments textbox, enter your new comment
4. Click OK
Verify that the new comment has been updated in the list.
Example 2.6. Adding a Configuration Object
This example shows how to add a new IP4Address object, here creating the IP address 192.168.10.10, to the
Address Book.
CLI
gw-world:/> add Address IP4Address myhost Address=192.168.10.10
Show the new object:
gw-world:/> show Address IP4Address myhost
---------------------
UserAuthGroups:
NoDefinedCredentials:
Web Interface
1. Go to Objects > Address Book
2. Click on the Add button
3. In the dropdown menu displayed, select IP Address
4. In the Name text box, enter myhost
Value
-------
Name: telnet
23
Type: TCP
0-65535
No
No
ALG: (none)
1000
Modified Comment
Important
Changes to a configuration object will not be applied to a running system until you
activate and commit the changes.
Property Value
-------------
Name: myhost
Address: 192.168.10.10
(none)
No
Comments: (none)
Chapter 2. Management and Maintenance
46