Viewing Traffic Shaping Objects; Idp Traffic Shaping P2P Scenario - D-Link NetDefendOS User Manual

Chapter 10: Traffic Management
Figure 10.8. IDP Traffic Shaping P2P Scenario

10.2.6. Viewing Traffic Shaping Objects

Viewing Hosts
IDP traffic shaping has a special CLI command associated with it called idppipes and this can
examine and manipulate the hosts which are currently subject to traffic shaping.
To display all hosts being traffic shaped by IDP Traffic Shaping, the command would be:
gw-world:/> idppipes -show
Host kbps Tmout
----------- ---- ----
192.168.1.1 100 58
A host, in this case with IP address 192.168.1.1, can be removed from traffic shaping using the
command:
gw-world:/> idppipes -unpipe -host=192.168.1.1
A full description of the idppipes command can be found in the separate CLI Reference Guide.
Viewing Pipes
IDP Traffic Shaping makes use of normal NetDefendOS pipe objects which are created
automatically. These pipes are always allocated the highest priority and use the Group feature to
throttle traffic.
The created pipes are, however, hidden from the administrator when examining the currently
defined traffic shaping objects with the Web Interface, but they can be examined and
manipulated using the normal CLI pipes command. For example, to show all currently defined
801