Dynamic Routing Rule Objects - D-Link NetDefendOS User Manual

A dynamic routing export rule must be created to explicitly export the route to the OSPF AS.

Dynamic Routing Rule Objects

The diagram below shows the relationship between the NetDefendOS dynamic routing rule
objects.
4.6.4.2. Dynamic Routing Rule
This object defines a dynamic routing rule.
General Parameters
Name
From OSPF AS
From Routing Table
Destination Interface
Destination Network
Exactly Matches
Or is within
More Parameters
Next Hop
Figure 4.16. Dynamic Routing Rule Objects
Specifies a symbolic name for the rule.
Specifies the from which OSPF AS (in other words, an OSPF
Router Process) the route should be imported from into either a
routing table or another AS.
Specifies from which routing table a route should be imported
into the OSPF AS or copied into another routing table.
Specifies if the rule has to have a match to a certain destination
interface.
Specifies if the network needs to exactly match a specific network.
Specifies if the network needs to be within a specific network.
Specifies what the next hop (in other words, router) needs to be for this
347
Chapter 4: Routing