D-Link NetDefendOS User Manual page 740

Network security firewall

Hide thumbs Also See for NetDefendOS:

Table of Contents

gw-world:/> l2tp -state=all

Active and listening sessions

------------------

my_l2tp_tunnel1

my_l2tp_tunnel2

It is also possible to examine the child sessions open in a tunnel using the -child option. An

example of this is shown below where a single session (#1) is active:

gw-world:/> l2tp -state=active -child

Active sessions

------------------

my_l2tp_tunnel1

The pptp CLI Command

NetDefendOS provides the CLI command pptp to show information about both PPTP clients

and servers. The pptp command syntax and output closely follows that of the l2tp command

described above. For example, to list the current state of all PPTP servers and clients, the

command would be the following:

gw-world:/> pptp -state=all

Active and listening sessions

------------------

my_pptp_tunnel1

Both these commands and their options are fully described in the separate NetDefendOS CLI

Reference Guide. Neither of these commands currently have an equivalent function in the Web

------------------ --------------- ----------------

------------------ --------------- ----------------

------------------ ------------------

Chapter 9: VPN

Show Quick Links

Table of Contents

Troubleshooting