Enabling The Wcf Performance Log - D-Link NetDefendOS User Manual

Dynamic Web Content Filter Statistics
Counter
---------------------- ---------------
Cache Size:
Cache Hit Rate:
Cache Miss Rate:
Request Lookups:
Request Queue Length:
Requests In Transit:
RTT per transaction:
Request Queue Delta:
Cache Replacements:
Last Cache Repl. - Hit Rate Idle:
Last Cache Repl. - Idle TTL Left:
Last Cache Repl. - Session TTL Left:
Server:
Connection Lifetime:
Note: This is in techsupport command output
The output from the CLI command httpalf -wcf is included in the output from the
techsupport command.

Enabling the WCF Performance Log

The example below shows how the WCF performance log feature is enabled.
Example 6.26. Enabling the WCF Performance Log
This example enables the WCF performance log feature so that a wcf_performance_notice log
event message is generated every 5 seconds. This log message provides a snapshot of the WCF
subsystem.
Command-Line Interface
gw-world:/> set Settings MiscSettings WCFPerfLog=5
Web Interface
1. Go to: System > Advanced Settings > Misc. Settings
2. Set WCF Performance Log to Every 5 Seconds
3. Click OK
Value
62 URLs
0 per second.
0 per second.
0 per second.
0 URLs.
0 URLs.
40 milliseconds.
0 URLs per second.
0 URLs per second.
N/A.
N/A.
N/A.
192.168.1.18
574 seconds.
525
Chapter 6: Security Mechanisms