Wizard Ha Setup - D-Link NetDefendOS User Manual

Network security firewall

Hide thumbs Also See for NetDefendOS:

Table of Contents

In the scenario shown above, the lan interface on the master and the lan interface on the slave

would be connected to the same switch which then connects to an internal network. Similarly

the wan interface on the master and the wan interface would connect to a switch which in turn

connects to the external Internet.

Wizard and Manual Software Setup

The software setup procedures are now divided into the two sections that follow:

Section 11.3.2, "Wizard HA Setup" for fast, simple setup.

Section 11.3.3, "Manual HA Setup" for step by step manual setup, without the wizard.

11.3.2. Wizard HA Setup

NetDefendOS provides a wizard to automate the HA setup procedure. The wizard needs to be

Note: The illustration shows a crossover cable sync connection

The illustration above shows a direct crossover cable connection between the sync

interfaces of each unit. Alternatively, the connection could be via a switch or broadcast

Chapter 11: High Availability

Show Quick Links

Table of Contents

Do you have a question about the NetDefendOS and is the answer not in the manual?