Tce System Requirements - Hitachi AMS 2000 User Manual

TCE system requirements

Table 5-1
•
•
•
AMS firmware version
Navigator 2 version
CCI version
Number of AMS arrays
Supported array AMS models
TCE license keys
Number of controllers:
Volume size
Command devices per array
(CCI only)
5–2
Hitachi AMS 2000 Family TrueCopy Extended Distance User Guide
describes the minimum TCE requirements.
Table 5-1: TCE Requirements
Item
Version 0832/B or later is required for AMS 2100 or
AMS 2300 arrays with hardware Rev. 0100.
Version 0840/A or later is required for AMS2500
arrays with hardware Rev. 0100.
Version 0890/A or later is required for AMS2100,
2300, or 2500 arrays with hardware Rev. 0200.
Firmware version 0890/A or more is required on
both local side and remote side arrays when
connecting Rev. 0200 hardware.
Version 3.21 or higher is required for the
management PC for AMS 2100 or 2300 arrays
where the hardware Rev. is 0100.
Version 4.00 or higher is required for the
management PC for an AMS2500 array where the
hardware Rev. is 0100.
Version 9.00 or higher is required for the
management PC for AMS 2100, 2300, or 2500
where the hardware Rev. is 0200.
01-21-03/06 or later is required for Windows host
only when CCI is used for the operation of TCE.
2
AMS2100/2300/2500
One per array.
2 (dual configuration)
S-VOL block count = P-VOL block count.
Max. 128. The command device is required only
when CCI is used. The command device volume
size must be greater than or equal to 33 MB.
Requirements and specifications
Minimum Requirements