Changing Pair Information; Monitoring Pair Status - Hitachi AMS 2000 User Manual

Changing pair information

You can change the pair name, group name, and/or copy pace.
1. From the command prompt, register the local array on which you want
to change the TCE pair information, and then connect to the array.
2. Execute the aureplicationlocal -chg command to change the TCE
pair information. In the following example, change the copy pace from
normal to slow.
•
% aureplicationremote -unit local array-name –tce –chg –pace slow
Are you sure you want to change pair information?
(y/n [n]): y
The pair information has been changed successfully.
%

Monitoring pair status

To monitor pair status
1. From the command prompt, register the local array on which you want
to monitor pair status, and then connect to the array.
2. Execute the aureplicationmon -evwait command. For example:
•
% aureplicationmon -unit local array-name –evwait –tce –st simplex –gno 0
Simplex Status Monitoring...
Status has been changed to Simplex.
%
Hitachi AMS 2000 Family TrueCopy Extended Distance User Guide
-locallun pvol –pvol 2000 –svol 2002 –remote xxxxxxxx
-waitmode backup
Operations using CLI
A–23