Displaying The Hardware Revision Number; Tce System Specifications - Hitachi AMS 2000 User Manual

Displaying the hardware revision number

The hardware revision (Rev.) can be displayed when an individual array is
selected from the Arrays list using Navigator 2, version 9.00 or later.
•

TCE system specifications

Table 5-2
•
Parameter
User interface
Controller configuration
Cache memory
Host interface
Remote path
Number of hosts when
remote path is iSCSI
Hitachi AMS 2000 Family TrueCopy Extended Distance User Guide
describes the TCE specifications.
Table 5-2: TCE Specifications
• Navigator 2 GUI
• Navigator 2 CLI
• CCI
Configuration of dual controller is required.
• AMS2100: 2 GB/controller
• AMS2300: 2, 4 GB/controller
• AMS2500: 2, 4, 6, 8 GB/controller
AMS 2100, 2300, and 2500: Fibre channel or iSCSI (cannot mix)
• One remote path per controller is required—totaling two for a pair.
• The interface type of multiple remote paths between local and
remote arrays must be the same.
Maximum number of connectable hosts per port: 239.
Requirements and specifications
TCE Specification
5–3