Setting The Remote Port Chap Secret - Hitachi AMS 2000 User Manual

Setting the remote port CHAP secret

iSCSI systems only. The remote path can employ a CHAP secret. Set the
CHAP secret mode on the remote array. For more information on the CHAP
secret, see
The setting procedure of the remote port CHAP secret is shown below.
1. From the command prompt, register the array in which you want to set
the remote path, and then connect to the array.
2. Execute the aurmtpath command with the –set option and perform the
CHAP secret of the remote port. The input example and the result are
shown below. For example:
•
% aurmtpath –unit array-name –set –target –local 85000027
–secret
Are you sure you want to set the remote path information?
Please input Path 0 Secret.
Path 0 Secret:
Re-enter Path 0 Secret:
Please input Path 1 Secret.
Path 1 Secret:
Re-enter Path 1 Secret:
The remote path information has been set successfully.
%
The setting of the remote port CHAP secret is completed.
A–14
Hitachi AMS 2000 Family TrueCopy Extended Distance User Guide
Adding or changing the remote port CHAP secret on page
(y/n[n]): y
Operations using CLI
6-14.