Hitachi AMS 2000 User Manual page 174

3. Execute the aurmtpath command to set the remote path.
Fibre channel example:v
% aurmtpath –unit array-name –set –remote 85000027 –band 15
Are you sure you want to set the remote path information?
(y/n[n]): y
The remote path information has been set successfully.
%
iSCSI example:
% aurmtpath –unit array-name –set –initiator –remote 85000027
–secret disable
Are you sure you want to set the remote path information?
(y/n[n]): y
The remote path information has been set successfully.
%
4. Execute the aurmtpath command to confirm whether the remote path
has been set. For example:
Fibre channel example:
% aurmtpath –unit array-name –refer
Initiator Information
Local Information
Array ID
Distributed Mode : N/A
Path Information
Interface Type
Remote Array ID
Remote Path Name
Bandwidth [0.1 M] : 15
iSCSI CHAP Secret
Path
Port
%
A–16
Hitachi AMS 2000 Family TrueCopy Extended Distance User Guide
–path0 0A 0A –path1 1A 1B
–path0 0B –path0_addr 192.168.1.201 -band 100
–path1 1B –path1_addr 192.168.1.209
: 85000026
: FC
: 85000027
: N/A
Status Local
0 Normal
1 Normal
Operations using CLI
: N/A
Remote Port
Remote IP Address
0A 0A N/A
1A 1B N/A
TCP Port No. of
Remote
N/A
N/A