Pair Operations; Checking Pair Status - Hitachi AMS 2000 User Manual

Family truecopy extended
Hide thumbs Also See for AMS 2000:
Table of Contents

Advertisement

Pair operations

This section provides CCI procedures for performing TCE pairs operations.
In the examples provided, the group name defined in the configuration
definition file is VG01.
The aureplicationremote command operates TCE pair. To refer to the
aureplicationremote command and its options, type in
aureplicationremote -help.
Confirm that the state of the remote path is Normal performing a pair
operation. If you do a pair operation when a remote path is not set up or its
state is Diagnosing or Blocked, the pair operation may not complete
correctly.
NOTE: A pair created using CCI and defined in the configuration definition
file appear unnamed in the Navigator 2 GUI. Consistency groups created
using CCI and defined in the configuration definition file are not seen in the
Navigator 2 GUI. Also, pairs assigned to groups using CCI appear
ungrouped in the Navigator 2 GUI.

Checking pair status

To check TCE pair status
1. Execute the pairdisplay command to display the pair status and the
configuration. For example:
C:\HORCM\etc>pairdisplay –g VG01
Group
S,Status,Fence, Seq#,P-LDEV# M
vg01
ASYNC ,85000175
vg01
ASYNC ,-----
The pair status is displayed. For details on the pairdisplay command
and its options, refer to the Hitachi Adaptable Modular Storage
Command Control Interface (CCI) Reference Guide.
CCI and Navigator 2 GUI pair statuses are described in
CCI
SMPL
COPY
PAIR
PSUS/SSUS
PFUS
Hitachi AMS 2000 Family TrueCopy Extended Distance User Guide
PairVol(L/R) (Port#,TID, LU) ,Seq#,LDEV#.P/
oradb1(L)
(CL1-A,
2
-
oradb1(R)
(CL1-B,
1
-
Table B-1: Pair Status Descriptions
Navigator 2
Simplex
Status where a pair is not created.
Synchronizing
Initial copy or resynchronization copy is in
execution.
Paired
Status where copy is completed and update copy
between pairs started.
Split
Update copy between pairs stopped by split.
Pool Ful
Status that updating copy from the P-VOL to the
S-VOL cannot continue due to too much use of
the data pool.
Operations using CCI
1, 1)85000174
1.P-VOL PAIR
2, 2)85000175
2.S-VOL PAIR
Table
Description
B-1.
B–7

Advertisement

Table of Contents
loading

Table of Contents