Ethernet Interfaces - Siemens SIMOTION D425 Manual

Features
Table 3- 3
Features
Connector type
Cable type
Cable type
Maximum cable length
Blanking cover
DRIVE-CLiQ pin assignment
Table 3- 4
PIN
1
2
3
4
5
6
7
8
A
B
Signal type: I = Input; O = Output; VO = Voltage Output
Additional references
●
●
●
●
●
●
For order numbers, refer to the list of references (separate document).
3.3

Ethernet interfaces

Interfaces for connection to Industrial Ethernet.
Industrial Ethernet is a communication network with a transmission rate of 10/100 Mbit/s.
D4x5
Manual, 05/2009
X100 - X103 (SIMOTION D425, D435) or X100 – X105 (SIMOTION D445/D445-1)
Type
DRIVE-CLiQ plug
DRIVE-CLiQ standard (inside the control cabinet)
MOTION CONNECT (outside the control cabinet)
100 m
See FAQ FAQ link
(http://support.automation.siemens.com/WW/view/en/31236839)
DRIVE-CLiQ interface (X100 - X103 or X100 – X105)
Signal name Signal type
TXP O
TXN O
RXP I
---- ----
---- ----
RXN I
---- ----
---- ----
+ (24 V) VO
M (0 V) VO
SINAMICS S120 Control Units and Additional System Components
SINAMICS S120 Booksize Power Units
SINAMICS S120 for AC Drives
SINAMICS S120
commissioning manual
Terminal Modules TM15 and TM17 High Feature
Supplementary SINAMICS System Components for SIMOTION
Meaning
Transmit data +
Transmit data -
Receive data +
Reserved, do not use
Reserved, do not use
Receive data -
Reserved, do not use
Reserved, do not use
Power supply for DRIVE-CLiQ, 450 mA maximum
Ground to 24 V
Manual
Manual
commissioning manual
Interfaces
3.3 Ethernet interfaces
Manual
Manual
39