Siemens SINUMERIK 840D sl Manual page 150

Connectable components
9.5 CBE30-2
Type plate
Note
You might need to access the information provided on the type plate after mounting. Since
the type plate after mounting the option board can no longer be read, we recommend that
you at least note down the serial number before mounting.
The following diagram shows you all of the information provided on the type plate.
Serial number
Order number
Module designation
Figure 9-24
This plate is only visible, when the option board has been removed; it is attached to the
underside of the option board.
Note
The contents of the individual type plate fields on the actual option board may differ from
those described in this manual (e.g. updated product status, approvals and markings not yet
issued, etc.).
LED displays
The four ports of the X1400 interface provide integrated LEDs for displaying the link and the
activity. The front panel of the CBE30-2 is also fitted with two LEDs (Fault and Sync), which
indicate the bus status.
Table 9-74
Name
Link port
Activity port
Fault
150
CBE30-2 type plate
LED displays
Color Status
Green lit
Yellow lit
Red off
lit
HW version
Meaning
The physical connection exists.
Data is being received or transmitted.
CBE runs without errors, data is being exchanged.
Bus fault:
● No physical connection to a subnet/switch
● Incorrect transmission rate
● Full duplex transmission is not activated.
Manual, 06/2014, 6FC5397-1EP40-5BA1
NCU 7x0.3 PN, NCU 7x0.3B PN