Epson Artisan 810 Service Manual page 221

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
In the case of Artisan 810/835/PX810FW/TX810FW/
C H E C K
PX820FWD/TX820FWD, you can operate selection of each
P O I N T
menu, etc. by pressing the following areas on the touch panel
while in the special inspection mode.
"Power" Left side of the touch panel
button (Menu backward)
"CD/DVD tray" button
Figure 5-16. Panel Operation in Special Inspection Mode
The operation for the special inspection mode for Artisan 837/
PX830FWD differs from that for the others. See
Inspection Mode (p324) "
In the case of Artisan 710/PX710W/TX710W, use the "Cross
Key and OK" button for menu selection.
2. Select "Special Inspection", and press LCD (Artisan 810/835/PX810FW/
TX810FW/PX820FWD/TX820FWD) or the "OK" button (Artisan 710/PX710W/
TX710W).
Inspection Mode
Run:OK / Select:[LEFT][RIGHT]
1. Mechanism Inspection
2. Special Inspection
3. Fax Inspection
4. Touch Screen Inspection
5. Development Mode
Figure 5-17. Case open sensor check (1)
ADJUSTMENT
Right side of the touch panel
(Menu forward)
LCD (OK/Menu selection)
"9.5.3 Special
for the details.
Adjustment Using Adjustment Program
3. Select "Sensor Check", and press LCD (Artisan 810/835/PX810FW/TX810FW/
PX820FWD/TX820FWD) or the "OK" button (Artisan 710/PX710W/TX710W).
Special Inspection Mode
Run:OK / Select:[LEFT][RIGHT]
1. Inspection ALL
2. CSIC & IES Check
3. Panel Key Test
4. LCD/RGB & LED Test
5. Rom Ver. Check
6. USB Host Test
7. Sensor Check
Figure 5-18. Case open sensor check (2)
4. Open the scanner and confirm the Cover open sensor condition changes to
"Open!".
Sensor Check
Cover open sensor condition
Open!
Photo Tray sensor condition
Open!
DUP unit sensor condition
Open!
After Check
Push [CDR Guide] Button
Figure 5-19. Case open sensor check (3)
Revision G
221
Confidential