Rear Left Housing - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
After removing/replacing the Upper Housing, make the specified
A D J U S T M E N T
R E Q U I R E D adjustments. (See Chapter 5
DISASSEMBLY/ASSEMBLY
"ADJUSTMENT".)
Disassembly/reassembly procedures specific to Artisan 710/PX710W/TX710W

4.3.1.4 Rear Left Housing

The disassembly/reassembly procedures for Artisan 810/835/837/
C H E C K
730/PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/
P O I N T
PX730WD/TX730WD differ from those for Artisan 710/725/
PX710W/TX710W/PX720WD/TX720WD. See below for the
procedures.
Artisan 810/835/PX810FW/TX810FW/PX820FWD/TX820FWD:
4.2.3.6 Rear Left Housing (p.117)
Artisan 837/PX830FWD:
9.4.2.4 Rear Left Housing (p.297)
Artisan 730/PX730WD/TX730WD:
9.4.2.19 Rear Left Housing (p.313)
Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing
Removal procedure
1. Remove the screws (x2) that secure the Rear Left Housing, and remove the
Rear Left Housing.
Rear Left Housing
Figure 4-168. Removing the Rear Left Housing
When installing the Rear Left Housing, insert the ribs (x2) of the
Rear Left Housing to the inside of the Left Housing. (See
4-168.)
Revision G
Left Housing
Rib
C.B.A. 3x6 (black) (6±1Kgfcm)
Fig.
184
Confidential