Epson Artisan 810 Service Manual page 152

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Make sure to install the Lower ASF Paper Guide Assy while
pressing the Spur Gear B in the direction of the arrow so as to
engage it with the Spur Gear C. (See
When installing the Lower ASF Paper Guide Assy, the tip of
the flap is inserted between the CDR Tray Assy and the Upper
Paper Guide. Take care not to damage the flap by getting
contact with such parts then. (See
Make sure to attach the Intermediate Roller A into the bearing
on the Base Frame. (See
Attach the rear side of the Lower ASF Paper Guide Assy so as
to let its roller and the Intermediate Roller B touch. (See
4-92, Fig. 4-96.)
Lower ASF Paper Guide Assy
Rear side
Figure 4-96. Installing the Lower ASF Paper Guide Assy
Insert the dowel of the left arm of the CDR Tray Assy into the
groove B on the Lower ASF Paper Guide Assy. (See
Make sure to align the dowels (x2) of the Base Frame with the
positioning holes (x2) of the Lower when reassembling them.
(See Fig. 4-92.)
DISASSEMBLY/ASSEMBLY
Fig. 4-92.)
Fig. 4-96.)
Fig. 4-92.)
Fig.
Flap
Fig. 4-92.)
Disassembly Procedures
Tighten a screw while pulling Lower ASF Paper Guide Assy
toward rear side of the printer when securing for Lower ASF
Paper Guide Assy. On this occasion, make sure the dowels
touche foreside of positioning holes in 80 column side. (See
4-97.)
Make sure the dowels touche with
foresideof positioning holes.
Figure 4-97. Tighten screw for Lower ASF Paper Guide Assy
Revision G
Fig.
152
Confidential