Epson Artisan 810 Service Manual page 267

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
2. Open the Panel Unit. (See Fig.
3. Release the hook (x1) on the rear of the Panel Unit, and remove the Panel
Rear Cover.
Panel Unit
Rear of Panel Unit
Hook Panel Rear Cover
Figure 8-8. Removing the Upper Housing (1)
4. Peel off the Panel FFC and the ferrite core that are secured to the Panel Shield
Plate with the double-sided tape (x2), and disconnect the Panel FFC from the
connector on the Panel Unit.
5. Pull out the ferrite core from the Panel FFC.
Rear of Panel Unit Panel Unit
Connector
Figure 8-9. Removing the Upper Housing (2)
Artisan 835/725/PX820FWD/TX820FWD/PX720WD/TX720WD
8-8.)
Panel FFC Panel Shield Plate
Double-sided tape
6. Remove the screws (x10) that secure the Upper Housing.
5
4
Upper Housing
1
Panel Unit
Figure 8-10. Removing the Upper Housing (3)
7. Lift the Panel Unit until the screw (x1) under the Right Hinge can be seen, and
remove the screw (x1).
Figure 8-11. Removing the Upper Housing (4)
Disassembly/assembly
2
7
10
C.B.P. 3x10 (6±1Kgfcm) C.B.S. 3x6 (8±1Kgfcm)
C.B.P. 3x10 (black) (6±1Kgfcm) C.B.S. 3x8 (black) (8±1Kgfcm)
C.B.A. 3x6 (black) (6±1Kgfcm) C.B.P. 3x10 (black) (6±1Kgfcm)
C.B.P. 3x12 (black) (6+1Kgfcm)
Right Hinge
Revision G
3
6
8
9
267
Confidential