Epson Artisan 810 Service Manual page 269

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
7. Tilt the Panel Unit by 45 degrees to align the rib of the shaft on the left side of
the Panel Unit with the groove of the Upper Housing.
Groove of the
Upper Housing
Rib of the shaft
Figure 8-15. Removing the Panel Unit (2)
8. Lift the Panel Unit so as not to let the Right Hinge interfere with the Upper
Housing, and remove the shaft from the bushing on the left side of the Panel
Unit.
Bushing
Panel Unit
Figure 8-16. Removing the Panel Unit (3)
Artisan 835/725/PX820FWD/TX820FWD/PX720WD/TX720WD
Right Hinge
Disassembly/assembly
9. Pull out the Panel FFC from the Panel Unit, and remove the Panel Unit.
Panel Unit
Panel FFC
Figure 8-17. Removing the Panel Unit (4)
10. Insert the tweezers or the like into the slit of the unlock button and peel off the
Panel Sheet.
Panel Unit
Reference point
for the panel
sheet attachment
Panel Sheet
Figure 8-18. Removing the Panel Unit (5)
Revision G
Unlock button
269
Confidential