Upper Housing - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

9.4.2.2 Upper Housing

This section describes the disassembly/reassembly procedures of the
C H E C K
Upper Housing for Artisan 837/PX830FWD.
P O I N T
The disassembly/reassembly procedures for Artisan 730/PX730WD/
TX730WD differ from those for Artisan 837/PX830FWD, therefore,
see "9.4.2.17 Upper Housing" (p.309)
Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Decoration Plate Left Upper Sub/Paper Guide Top Assy
Removal procedure
The grounding wire is attached to the frame with a screw. Be careful
C A U T I O N
not to deform the Frame when removing the screw.
1. Remove the screw (x1) and release the grounding wire.
Figure 9-6. Releasing the Grounding Wire
Artisan 837/730/PX830FWD/PX730WD/TX730WD
for the procedures.
Grounding wire
C.B.S. 3x6 (8±1Kgfcm)
2. Release the hook (x1) and ribs (x3) of the Front Harness Cover with the
flathead screwdriver, and remove the Front Harness Cover from the Upper
Housing.
Figure 9-7. Removing the Upper Housing (1)
Disassembly/assembly
Revision G
Harness Front Cover Upper Housing
Hook
Rib
Confidential
294