WisyCom MPR30-IEM Manual page 8

W D
ISYCOM RIVERS
How to check if the Wisycom USB driver of UPK300 is installed on the PC

connect the device using USB cable (UPK300E)

open Windows Control Panel

select Hardware and Sound

select Device Manager

verify that the hidden devices are showed

check item Controller USB device: if Wisycom Device is present, then
the USB Wisycom Driver of UPK300 is installed. Otherwise it is necessary to install the driver.
How to install the driver for USB interface of UPK300

Download Drivers.zip from the web site

Unzip the folder

Run DriverInstaller.exe
For Windows 8 platform, if you have problem during the installation (ex. the INF file is not
correct,....) please see section "How to install Wisycom Driver on Windows
Pag. 7
MPR30 Manager
8".