Wiegand Module - 2N Helios IP Verso Installation Manual

If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
Technical specification:
Resolution: 320 px x 214 px H x V
Resolution slideshow: 214 px x 214 px
Contrast ratio: 400
Brightness: 350 cd/m2
Weight: 280 g
Working temperature: -30 °C – 60 °C
Resistance level: IK07

Wiegand Module

The Wiegand module (Part No. 9155037) is one of the
elements and is used for connecting an external Wiegand device (RFID card reader,
fingerprint or other biometric data reader) and/or connecting the 2N
system to an external security exchange. All the inputs and outputs are galvanically
isolated from the 2N
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes an 80 mm long interconnecting cable.
The module name is configured in the Module name parameter in the Hardware /
Extenders menu.
The input LED IN is addressed as follows:
module2.input1.
The input Tamper is addressed as follows:
module2.tamper.
The output LED OUT (negated) is addressed as follows: <module_name>.
<output1>
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Helios IP Verso system with insulation strength of 500 V DC.
®
2N Helios IP Verso
, e.g. module2.output1.
®
2N Helios IP Verso
®
bus connectors.
<module_name>.<input1>
<module_name>.<tamper>
intercom
Helios IP Verso
, e.g.
, e.g.
239/272