Table of Contents
Advertisement
RESTORING FACTORY SETTINGS
Restoring the factory settings will:
• Restore the original programming code
• Restore the pre-programmed user codes
DO NOT reset your lock unless you are able to locate the original programming code
Customer service cannot retrieve a lost programming code.
To restore factory settings:
• Disconnect the batteries.
• On the lock keypad, press and release the # button.
• Reconnect the battery and wait until the led is no longer lit.
• Within ten (10) second, press and hold the # button until it lights green and the lock beeps.
VACATION MODE FUNCTION
Vacation mode is used to temporarily disable all user codes at the keypad. If a valid code is
entered while the lock is in vacation mode, the led will first light green and then red, and the
lock will not unlock.
If you will be away from your home for a period of time in which no one should have access
to your lock, it is a good idea to use vacation mode to prevent repeated access attempts.
Vacation mode can be disabled at the keypad by entering the six-digit programming code.
19
Hide quick links:
Advertisement
Table of Contents
