Schlage L9000 Series Installation Instructions Manual

*P516-908*
P516-908
L9000 Series Lock with Indicator Escutcheon Trim
Indicator trim is available for either the inside or outside of the door on allowable functions.
Non-indicator trim is furnished on the opposite side of the door.
The L9000 lock with indicator is not intended for exterior door applications.
For retrofit, see page 7.
Inside indicator escutcheon
available with cylinder or
thumb turn.
Check the door preparation dimensions with the template included in the package.
1
IMPORTANT! Check lock handing before installation.
To change handing:
1. Pull out the latch
and rotate 180°.
2. Remove the lock
handing screw
from one side of
the chassis and
install it on the
opposite side.
The lock handing
screw should
always be on the
interior side of the
door.
L9000 Lock with Indicator
Tools
Thumb turn indicator inside and cylinder non-indicator outside shown
Pull
Rotate
180°
OR
2
Install lock chassis
Handing
screw
Outside indicator
escutcheon options
Cylinder
OR
Emergency
turn
DO NOT FULLY TIGHTEN
CHASSIS MOUNTING SCREWS.
Installation Instructions
Coin turn