Manual Programming Codes - Schlage LE162 Installation Instructions & User Manual

MANUAL PROGRAMMING CODES

If the solution access is temporarily lost, changes to the lock can be entered manually at the
lock's keypad. See Manual Programming Functions on the inside front cover
for more information.
Lights/Beeps Legend
Three lights and
three beeps 1
One long flash and
1
one long beep
One long flash and
two beeps 1
Programming Legend
#
See inside front cover for Manual Programming Functions.
1 Beeps will sound only when the beeper is turned on. Low battery beeps will sound even when the beeper is disabled.
Step Confirmation:
A correct entry was made during programming
and accepted by the lock.
Function Confirmation:
Error:
An incorrect entry was made during programming or lock already
unlocked. For other errors, see the troubleshooting section on page 21.
Backlight:
Entire keypad glows blue during programming and/or when
any button is pressed.
Programming Code (six digits):
for more information.
Hash Button:
• Used for programming.
• Used to turn on the backlight.
User Codes (four digits):
information.
Keypad Numbers:
• Used for programming.
• Used to enter a user code to unlock the lock.
A set of steps was completed successfully.
See Programming Code on page 16
See User Codes on page 16 for more
17