Table of Contents
Advertisement
In the unlikely event of a machine failure requiring Service Centre
action an Error Number will be displayed along with your local
Service Centre Telephone Number.
To enter the Service Centre Telephone
Number, go to the SETUP TELEPHONE
display, scroll (
VICE NO. display and enter the telephone
number as previously detailed.
The Server Crediting System telephone number must be prefixed
by the appropriate outside line digit (for most systems this is a 9
or a 0), if your outside line is routed through a switchboard.
Using the brown keys scroll (
to the PREFIX display:
OK
Press
to change or enter.
Next, enter the appropriate prefix.
OK
Press
to confirm.
It may be necessary to enter a pause between the outside line
digit and the new telephone number:
Using the brown keys scroll (
to the PAUSE display and enter a number
between 0 and 9.
OK
Press
to confirm.
A TONE DETECT facility is available to enable the machine to
detect a dialling tone before dialling the number.
Using the brown keys scroll (
to the TONE DETECT display and press
OK
.
{HELPDESK NO.}
) to the SER-
)
)
)
{
PREFIX
NONE
{
PAUSE
NONE
TONE DETECT
{
ON
Server procedures
}
}
}
33
Hide quick links:
Advertisement
Table of Contents
