Meter Screen - Fluke 434-II User Manual

Fluke 434-II/435-II/437-II
Users Manual
With the arrow keys you can select Column 2 where the readings belonging to the
selected Category are listed. The readings indicated with
also show up in Column 3.
The readings indicated with
the up/down arrow keys. Next if you press F3 – ADD the reading will be added to
Column 3 of selected readings. Note that in column 2 the
front of the reading just selected.
With the arrow keys you can select an active reading in Column 3. Next if you press F4 –
REMOVE the reading is removed from the list of active readings.
With F3 – MOVE you can move a certain reading to a higher position in the list of
selected readings.
When ready press F5 – OK.
Available function keys in Start menu:

Meter screen

To access the Logger Meter screen:
This screen displays all current readings of the logger function. Use up/down arrow keys
to scroll across the Meter screen.
Available function keys:
21-2
info@Fluke-Direct.ca
are not active. An inactive reading can be selected with
Access to Readings Select menu.
F1
Access to the menu to define the name of the file with
F2
logging data.
Start of the logging and access to Logging Trend screen.
F5
F5
Up/down arrow keys are assigned to scroll Meter screen
F1
up/down.
Access to Trend screen.
F3
Access to Events Table.
F4
Stop/Start logging.
F5
Fluke-Direct
are active readings and they
symbol now shows up in
.ca
1.800.868.7495