Unit Choice; Tds Choice; Temperature Unit Choice - Hach POLYMETRON 9125 Operator's Manual

Transmitter 9125 – Conductivity / resistivity measurement

UNIT choice

DISPLAY
S/cm
UNIT : S/cm
TDS : NO
TEMP. : °C
LANGUAGE : GB
Select

TDS choice

DISPLAY
UNIT : S/cm
YES
TDS :
TEMP. : °C
LANGUAGE : GB
Select

Temperature UNIT choice

DISPLAY
UNIT : S/cm
TDS : YES
°C
TEMP. : °C
LANGUAGE : GB
Select
As the language used, it's possible to choose the units
of the measures in which they will be display.
Unit. allows to choose one of the units in
conductivity or resistivity in which values will be
done.
S/m
.cm
S/cm
.m
TDS : yes/no.
When the option TDS is selected (Yes), the
measurements will be displayed in concentration
units : in ppt (pare per thousand), ppm (part per
million) ppb (part per billion) according to the
measurement level.
When the option TDS is not selected (No),
measurements are displayed in
according to the unit selected ; Menus for
calibration of the TDS measurement are not
displayed anymore.
Allow to choose a temperature display between
Celsius or Fahrenheit degree.
.cm or S/cm
Page 27