Transmitter 9125 – Conductivity / resistivity measurement
Modification of a value
Measures display
26.8
S1
S3
mS/cm
25.0°C
S2
S4
Disp2
Menu
Page 24
The highlighted digit may be modified with the key
. Each digit can be validated by pressing
ENTER. Repeat both operations for each digit.
Note :
If you do not use the display for at least 10
minutes,
the
instrument
measuring mode except for the calibration and
maintenance mode.
An access code may be required for the
calibration, programming and service menu (see
CODE menu).
Measures display allow to display measures and state
of the device. There are three :
Reference
Main display
Alarm state
Function keys
returns
to
the
Description