Using The 9125 Transmitter; Utilization Rules For The Menus - Hach POLYMETRON 9125 Operator's Manual

Transmitter 9125 – Conductivity / resistivity measurement
4.

Using the 9125 transmitter

Utilization rules for the menus

The user interface of the 9125 transmitter is made of a
display screen and 4 keys.
The (Esc) key is used to go back to the previous
menu.
The (Enter) key is used to validate the selections and
the data.
Both middle keys, right and left function keys, are
defined according to the words and symbols which are
displayed above each function key.
Modify a parameter
Select Choose a menu
Main Go back to the main display principal
Menu Display the main menu
Disp2 Display screen 2
Disp3 Display screen 3
OK Validate the measure during a calibration
- Increase a value
+ Decrease a value
26.8
S1
25.0°C
S2
Disp2
S3
mS/cm
S4
Menu
Page 23