Transmitter 9125 – Conductivity / resistivity measurement
2.
Installation of the transmitter
Unpacking of the transmitter 9125
Advice for installation
Inspect the package at the reception to detect an
eventual damage due to the transport. Make sure the
package contents are not damaged.
Check if the package corresponds to your order :
quantity delivered,
type of instrument and version accordingly to the
instruction plates,
accessories : 4 cable glands and 2 mounting
screws + flanges,
instruction manual,
certificate of conformity to specifications.
Choose a site where :
vibrations are not too excessive,
supply relays or commuters are away,
maintenance will be easy.
Note :
Information : It is preferable to mount the
instrument
above
eye
unrestricted view of the front panel displays and
controls.
level,
allowing
an
Page 11