Led Description - Promise Technology Pegasus3 R4 Product Manual

Pegasus3 Product Manual Introduction

LED Description

System Status*
The System Status LED located on the Power button lights blue when the Pegasus3
is operating normally. When the system is booting up, this lights orange and will light
blue when fully booted if there are no problems detected. A red System Status LED
indicates a serious problem such as an incomplete array or failed hard disk drive.
Thunderbolt Link
This LED will light blue when the Thunderbolt cable is connected, they remain dark
when there is no link.
Drive Status and
The Drive Status LED lights blue when a physical drive is present and functioning
Activity*
normally. A red Drive Status LED indicates a problem with the physical drive or an
array. The Drive Activity LED lights blue when the physical drive is present and blinks
blue when there is activity on the drive.
* See "Checking LEDs" on page 191 for more details about using LED indicators for troubleshooting.
5