User Menu - Uwatec Aladin H User Manual

5.2.3

User menu

Selecting the units
1. Confirm that you wish to change the
units with a press-and-hold of the right
button.
"°C" or "°F" starts to flash.
2. Switch between "°C" and "°F" by
pressing the left or right button.
3. Confirm the selected unit with a press-
and-hold of the right button.
Meters or Feet start to flash.
4. Switch between meters or feet by
pressing the left or right button.
5. Confirm the selected unit with a press-
and-hold of the right button.
1. Confirm that you wish to change the
pressure units with a press-and-hold of
the right button. "bar" or "psi" starts to
flash.
ALADIN H USER MANUAL
2. Switch between "bar" and "psi" by
pressing the left or right button.
3. Confirm the selected pressure unit with
a press-and-hold of the right button.
Setting the backlight duration
1. Confirm that you wish to change the
duration of the backlight illumination with
a press-and-hold of the right button.
The value starts to flash (2-12secs or
push on/push off).
2. Change the duration by pressing the left
or right button.
3. Confirm the selection with a press-and-
hold of the right button.
Resetting the remaining saturation
WARNING
• Diving after a reset of the remaining
saturation may lead you into potentially
hazardous situations which could result in
death or serious injury. After a reset of the
remaining saturation do not dive for at least
48 hours.
• If you dive after resetting the remaining
saturation the computer will miscalculate
your decompression, which may result in
serious injury or death. Reset the remaining
saturation only if you know you will not be
diving, flying or going to higher altitude for
the next 48 hours.
51