Table of Contents
Advertisement
Date
Silent mode
Check the battery
state
1. Starting from the time of day display,
press the left or right button until
"WATCH" appears.
2. Confirm that you wish to enter into the
watch menu with a press-and-hold of
the right button.
3. Once entered you can scroll through
the menu by pressing the left or right
button.
5.3.1
Setting the alarm clock time
The alarm clock tone works only at the
surface.
1. Confirm that you wish to set the alarm
time with a press-and-hold of the right
button.
"On" (activated) or "Off" (deactivated)
starts to flash.
2. Switch between "On" and "Off" by
pressing the left or right button.
3. Confirm the selected status with a
press-and-hold of the right button.
The hours start to flash.
4. Set the hours by pressing the left or
right button.
5. Confirm the setting with a press-and-
hold of the right button.
The minutes start to flash.
6. Set the minutes by pressing the left or
right button.
7. Confirm the setting with a press-and-
hold of the right button.
ALADIN H USER MANUAL
On, warnings,
on
alarms, off
5.3.2
Setting the UTC offset
(coordinated universal time)
This setting allows you to quickly set the
watch to a new time zone without affecting
the actual time setting.
1. Confirm that you wish to set the UTC
offset with a press-and-hold of the right
button.
The hours start to flash.
2. Set the hours by pressing the left or
right button (-13/+14hrs).
3. Confirm the setting with a press-and-
hold of the right button.
The minutes start to flash.
4. Set the minutes in increments of 15
minutes by pressing the left or right
button.
5. Confirm the selected status with a
press-and-hold of the right button.
5.3.3
Adjusting the time of day
You can adjust the Aladin H to your time
zone either in this menu or using the UTC
offset (see above).
1. Confirm that you wish to adjust the time
of day with a press-and-hold of the right
button.
The hours start to flash.
2. Set the hours by pressing the left or
right button.
53
Advertisement
Table of Contents
