Table of Contents
Advertisement
3.4.2
Setting bookmarks
During the dive you can create bookmarks
in your dive profile with a press of the
left button. An audible signal confirms
the creation of the bookmark. These
bookmarks will be graphically displayed in
the dive profile of LogTRAK.
3.4.3
Dive time
All time spent below a depth of 0.8m/3ft is
displayed as dive time in minutes. The time
spent above 0.8m/3ft is counted as dive
time only if you once again descend below
0.8m/3ft within 5 minutes.
While the dive time is running, the colons
to the right of the figures are flashing in
1-second intervals.
The maximum dive time displayed is 199
minutes. If a dive lasts longer than 199
minutes the dive time display starts again
at 0 minutes.
F
NOTE: Half time alarm (turn around
alarm): If half of the set maximum dive
time has elapsed, an audible signal will
sound and the
1 minute.
When the set dive time has elapsed
an audible alarm sounds and the dive
time starts flashing.
18
symbol flashes for
3.4.4
Current depth/O
Current depth is given in 10cm increments
in the metric setting and 1ft increments in
the imperial setting.
Current depth
At a diving depth of less than 0.8m/3ft the display
shows " – – – ".
3.4.5
Max depth/Tank pressure
Max depth
Max depth is displayed only if it exceeds
the current depth by more than 1m/3ft
(maximum indicator function). Max depth
can be accessed by pressing right button
twice. As a standard, Aladin H displays
tank pressure.
The O
% mix is displayed as long as the
2
CNS O
% is less than 50%. More than 50%
2
and the CNS O
% is displayed.
2
% mix
2
Oxygen mix
CNS O
%
2
ALADIN H USER MANUAL
Advertisement
Table of Contents
