Checking The Battery Condition - Uwatec Aladin H User Manual

dive menu) and then another press-and-
hold (taking you to surface interval).
Surface interval is the elapsed time since
the end of your last dive; it is displayed as
long as there is remaining saturation.
2.2.8 Checking the battery
condition
Indicator in battery
status display
000000
_00000
__0000
___000
____00
_____0
ALADIN H USER MANUAL
At other displays
Battery symbol
Blinking battery symbol, Completely used battery,
no dive symbol
Blinking battery symbol, Completely used battery,
no dive symbol change to fresh, Aladin
H may make a reset any
From the time of day display you can check
the battery condition by pressing the left or
right button to scroll to the watch menu. With
a press-and-hold of the right button you enter
watch settings, then press the right button 6x
to scroll to the battery status screen.
The battery status screen shows how much
energy is left in the CR2450 battery. A fresh
battery is indicated by 6 zeros.
While the Aladin H periodically monitors
battery status, you can manually trigger a
status check with a press-and-hold of the
right button while in this screen.
The Aladin H's intelligent battery algorithm
will limit some functions as you near the
end of the battery's life. See the table
below for battery status and corresponding
function limitations.
Battery status Function limitations
Fresh battery
Battery ok for diving
Battery ok for diving
Weak battery, change
to fresh
Buzzer and backlight
not operating, diving
change to fresh
allowed, only watch is
active. Settings cannot
time and remain off
none
none
none
Backlight not
operating
not recommended
Diving mode not
be changed (OFF)
11