Diving In Gauge Mode; After Diving In Gauge Mode; Diving With Microbubble (Mb) Levels - Uwatec Aladin H User Manual

3.7.2

Diving in gauge mode

The following information is displayed in
gauge mode:
Current depth
Tank Pressure /
Max depth /
Temperature /
Average depth
By pressing the right button you can
scroll from tank pressure to max depth to
temperature to average depth to the time
of day and back to the tank pressure. By
pressing the left button you can restart
the stopwatch. This also generates a
bookmark.
Average depth is continuously updated
and represents the time-averaged depth
since the beginning of the dive. You can
reset the average depth at any time with
a press-and-hold of the right button. This
also generates a bookmark.
Stopwatch
In gauge mode, after immersion the Aladin
H will automatically monitor the dive
time and, at the same time, activate the
stopwatch. The stopwatch will run for a
maximum of 24 hours.
• Pressing the left button resets time and
starts the stopwatch from zero.
• Each start (restart) of the stopwatch
creates a bookmark.
ALADIN H USER MANUAL
3.7.3

After diving in gauge mode

Dive time
Stopwatch
The Aladin H shows the remaining time
span during which it cannot be used in
computer mode. Once the waiting period
is over, the gauge mode can be switched
off manually.
The no-fly time after diving in gauge mode
is 48 hours. Desaturation time will not be
displayed.
3.8 Diving with microbubble
(MB) levels
Microbubbles (MB) are tiny bubbles that
can build up inside a diver's body during any
dive and normally dissipate naturally during
an ascent and on the surface after a dive.
Dives conducted within no-stop times and
the observance of decompression stops do
not prevent the formation of microbubbles
in the venous blood circulation.
Dangerous
migrating into the arterial circulation. The
reasons for the migration from the venous
blood circulation to the arterial circulation
can be a great many microbubbles
collecting in
has equipped the Aladin H with a new
technology to help protect divers from
these microbubbles.
With the Aladin H, you can choose –
according to your specific needs – a MB
level that will provide a level of protection
from microbubbles. Diving with MB levels
includes additional ascent stops (level
stops); this slows the ascent process,
giving the body more time to desaturate.
This works contrary to the formation of the
microbubbles and increases safety.
microbubbles are
the lungs. SCUBAPRO
those
27