FX
-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK
2N
4.
Operation
4.1
Operating procedure
The flowchart below shows the operating procedure.
Set the on-line station setting switch and the
I/O occupation setting switch on the front
face of a master block.
Set the station Nos. of remote I/O units.
Connect the master block and remote I/O
units.
Turn on the power.
Perform programming.
Start
End
. . . . . Refer to 4.2
. . . . . Refer to 4.3
. . . . . Refer to 3
. . . . . Refer to 4.4
Operation 4
4-1