Mitsubishi FX2N-16LNK-M User Manual page 35

FX -16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK
2N
4 ) Assign remote I/O units to be used to the table above from the station No. 0 in turn.
Example
FX
Enlarged table above
X (input)
Y (output)
Station No. 0 Station No. 1 Station No. 2 Station No. 3
8 I/O points
(4 for input and
4 for output)
Vacant numbers vary depending on used remote I/O units. For more information, refer to the attachment at the end of
*
this manual.
Master block FX -16LNK-M
2N
8 I/O points (4 for input 4 input points
and 4 for output) (input only)
 
   
4 input points
(input only)
8 output points
(output only)
     
8 output points
(output only)
Operation 4
* Arbitrary number can be assigned as a
station No. without regard to the wiring.
In this example, the station No. 0 is
assigned to a remote I/O unit nearest to
the master block.
: I/O No. is assigned.
:
Area occupied by remote I/O
unit (I/O No. is not assigned.)
4-9