Quad Screen or Full Screen
This display has the capability to display a quad screen or full screen from any of the four HDSDI
inputs. The image seen here is the bottom view of the FD215CV-C-7 LCD. Connecting the SDI
input to the output of the attached quad box on the unit will enable the operator to view any image
from any of the connected screens on board the aircraft. Simply connect the other units to the
inputs labelled 1 through 4 on the quad box to initiate the connection.
The button display below is centrally located on the bottom of the bezel display of the unit. The
number keys will allow you to look at that connection display or the user can use PIP (Picture in
Picture) to set their own preference. The QUAD button will display all connected HDSDI inputs at
once. The SWAP Button will enable the user to move around through the multiple HDSDI
connections.
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD215CV-C-7
PIP
C
S
Q
O
W
U
M
A
A
P
P
D
4 3 2 1
1
2
3
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Revision Date:
Rev:
01/10/2017
B
Page 16 of 25
4