Loading The Factory Settings - MB Connect Line mbNET.mini User Manual

13

Loading the factory settings

Before you reset the device to its factory settings, note the following:
• The device must be operational (LED Pwr + Rdy light up).
• The IP address of the router is reset to 192.168.0.100.
You may have to adjust the network settings of the configuration computer accordingly.
To reset the mbNET.mini to factory settings, proceed as follows:
Click the button Reset once
Then press Function straight afterwards
and keep it pressed down
After about 60-90 seconds, the Rdy LED
starts flashing .
As soon as the Usr LED starts to flash, re-
lease the button Function
When the LED Pwr and Rdy light up, the
factory settings have been loaded
The mbNET.mini is now ready for operation and be configured again.
Page 82 of 90 | Version: 1.6.0 DR 03 (10.01.2017) - EN | 10.01.2017
ADVI C E
.
.
.
.