Loading The Factory Settings - MB Connect Line mbNET.rokey Series Quick Start Up Manual

12 Loading the factory settings

Before you configure the device to its factory settings, you should note the following:
• Save your configuration first. After restoring the factory settings, all of your settings/
changes will be deleted.
• The IP address of the device is reset to the original IP address (192.168.0.100).
• You may also need to modify the network settings of the configuration PC accordingly.
• The device password is reset to its individual default password. The default password
can be found on the back of the unit.
• No USB stick/USB storage medium should be connected to the device.
NOTICE
- 25 -