Security > Forwarding - MB Connect Line mbNET.mini User Manual

11.8 Security > Forwarding
Designation Description
Enable If the box has been checked, the following settings will be active after saving.
Source IP You can enter the IP from which data packets are to be received here.
If an entry is made here, only packets from this one address are forwarded.
Source Port You can specify the port via which the data packets arrive here.
If an entry is made here, on-ly packets specifically sent via this port are forwarded.
Protokoll The following options are available for selection:
All: This setting applies to all protocols.
TCP: This setting only applies to the TCP protocol.
UDP: This setting only applies to the UDP protocol.
ICMP: This setting only applies to the ICMP protocol.
Destination IP Enter the IP to which the data packets were originally to be sent here.
Destination Port Specify the port via which the data packets are sent to the destination IP here.
Forward IP Enter the IP to which the data packets are actually to be forwarded here.
Forward Port Specify the port via which the data packets are actually to be forwarded here.
auf alle The "FORWARDING" setting is applied to all connections, i.e. even incoming VPN connections. If
Verbindungen an- this option is not set, the setting only applies to incoming packet from the Internet, but not a VPN
wenden connection via the Internet.
Accepts the new settings and temporarily stores them.
Edits the settings in the current line.
Deletes setting
Configuring Your Router in the Portal (V 1.x) | Page 65 of 90