Device State - MB Connect Line mbNET.mini User Manual

10.3.2 Device State

The status page of the device opens automatically
a) after completing the "First Start" menu by click-
ing the "Apply" button
b) at each future access to the web interface of
the device
Here all steps are shown, which are necessary so
that the device can establish a connection to portal.
After all steps have been successfully completed,
each step has a green check mark.
If there is a device configuration on the portal ready
for download, the device download now its configura-
tion.
In the header of the Status page, see the following
fields / buttons:
Language Selection field for the user language
| Setup | Calling the setup menu (Firststart)
| Help | Calling the device online help
| Reboot >> | Triggering a device restart
In the device status bar following information is displayed:
all device types
MDH 861, MDH 862
MDH 863
Five Step Status Check
Here you can read out each step details. Click on the
icon (right of each progress), shown as:
,
grüner Haken oranger Kreis
Page 52 of 90 | Version: 1.6.0 DR 03 (10.01.2017) - EN | 10.01.2017
Device type and (Firmware version) - Serial number
additionally Signal strength (GSM) - GSM network - Provider
additionally Signal strength(WLAN) - SSID
,
rotes Dreieck
= everything OK
= processing
= Error