Transferring Configuration To The Device - Via Mbdialup - MB Connect Line mbNET.mini User Manual

10.1.4.3 Transferring configuration to the device - via mbDIALUP

For this, the mbNET.mini must be accessible
from a PC on the LAN, irrespective of its LAN
IP, and the computer must have a connection to
mbCONNECT24 portal.
After clicking "Submit configuration to de-
vice", the system performs a scan of all de-
vices connected to the LAN interface (mb-
NET/mbSPIDER) and displays them.
If the assignment of the configuration file to the
identified device is correct, click on "go >>" to
confirm.
In the next window click on „start configuration
transfer".
The settings from mbCONNECT24
copied to the device.
If all items have been processed, acknowledge
the transfer by clicking the "Finished" button.
If the mbNET.mini is able to connect to the Internet (e.g. network, telephone cable, SIM card, antennae in-
stalled), the device will subsequently log in to your account. This is displayed by the flashing LED Con.
If the flashing frequency of the LED Con is 3 Hz, the device attempts to log into the portal. When the login is
successful, the flashing frequency is reduced to 1.5 Hz.
Page 34 of 90 | Version: 1.6.0 DR 03 (10.01.2017) - EN | 10.01.2017
are now