Interface Assignment; Pinout Of The Terminal Block On The Bottom Of The Device; Pinout Of Lan/Wan Ports On The Front Panel Of The Device; Pinout Of The Usb Port On The Front Panel Of The Device - MB Connect Line mbNET.mini User Manual

8

Interface assignment

8.1

Pinout of the terminal block on the bottom of the device

- 0V DC connection
+ Power source connection 10-30V DC
FE Functional earth
I1 Digital input I1 (10-30V DC)
I2 Digital input I2 (10-30V DC)
* Input 1 can only be configured for establishing the connection to the portal mbCONNECT24.
** Input 2 can be cofigured to send emails, SMS, Internet SMS or to start a reboot.
8.2

Pinout of LAN/WAN ports on the front panel of the device

Signal
1 TX+
2 TX-
3 RX+
4 Not connected
5 Not connected
6 RX-
8.3

Pinout of the USB port on the front panel of the device

Signal
1 VCC (+5V)
2 - Data
3 +Data
4 GND
Page 14 of 90 | Version: 1.6.0 DR 03 (10.01.2017) - EN | 10.01.2017