8.2 Diagnostics
In case of a failed connection setup,
the diagnostic page supports for
trobleshooting. The respective result of
the individual, independent functions /
commands you need, inter alia in case
of support�
9 Loading the factory settings
Before you reset the device to its factory settings, note the following:
• The IP address will reseted to the default (192.168.0.100).
You may need to modify the network settings of the confi guration PC accordingly.
• There must be no USB fl ash drive be connected to the device.
• The device must be operational (LED Pwr + Rdy light up).
- 24 -
Fc1
Fc2
Fc3
Fc4
Rdy
Con
Pwr
Err
Need help?
Do you have a question about the mbNET Series and is the answer not in the manual?