Installing Simms; Installing A Simm - Mitsubishi Electric APRICOT FT//EX User Manual

2.2.1

Installing SIMMs

1. Slip a SIMM at a 45
down.
NOTE:
2. Gently press the SIMM up until the pegs of the socket slip into the holes
on the SIMM and the holding clips lock the SIMM into position.
NOTE:
Figure 2-2

Installing a SIMM

2-6 Owner's Handbook
2. Be careful when inserting or removing SIMMs.
Forcing a SIMM in or out of a socket can damage
the socket.
o
angle into a socket with the component side facing
Always install SIMMs from Bank 0.
The SIMM should be at 90 angle when installed.
o