Table of Contents
Advertisement
5.2
Basic System Configuration
(Pentium CPU)
In the Pentium version, the following screen appears when you select System
Configuration from the main menu:
WARNING
The following parameters in the Advanced System Configuration depend
on CPU in use. Press F9 to set the default value for the best system
performance. The system may hang if any of these parameters are set
incorrectly.
Cache Read Cycle
Memory Block Configuration
= Move Highlight Bar,
The Basic System Configuration screens are the same as the 486 version. Refer
to section 5.1 for the descriptions of the parameters.
5-1 Owner's Handbook
System Configuration
Basic System Configuration
Advanced System Configuration
= Select,
Page 1
Create Write Cycle
Esc = Exit
Advertisement
Table of Contents
